Pioneer VSX-AX5i-G - Manual (Page 39)

Setting Up for Surround Sound
39
En
SURROUND SETUP
Surround Back System
This setup selects how your surround back system will be used. If you want to use it for surround back speakers in
your main speaker system choose NORMAL SYSTEM. In this case you won’t have any B (or secondary) speaker
system as these speakers fill that role also for the VSX-AX5i. If starting fresh, complete steps 1-3 on page 38.
1 SURRBACK SYSTEM should be
selected. If it isn’t use the  buttons
to select it. Press the ENTER button.
The setup possibilities appear on your TV.
2 Use the  buttons to select the
surround back system setting. Press
the ENTER button.
Choose from:
NORMAL SYSTEM: if you want to use these speaker
terminals for your surround back speakers in your
main speaker system (referred to as the A speaker
system).
SECOND ZONE: if you want to use the these speaker
terminals for an independent speaker system (referred
to as speaker system B)
FRONT BI-AMP: Choose this setting if you want to
deliver more power to your front speakers. This setting
will use your surround back speaker terminals so you
will only be able to get 5.1 channel playback. Also, you
will have to bi-wire your speakers to do this (see
page 75).
3 EXIT should be selected. Press the
ENTER button.
You will return to the SURROUND SETUP menu
display. Next, proceed to either AUTO SETTING
(page 13) or NORMAL (page 40).
If you want to change a setting before proceeding
start over from step 1.
3
2
1
1-3
VSX-AX5i.book Page 39 Friday, May 23, 2003 6:33 PM