Pride Mobility Jazzy 1122 User Manual

Page 24

Advertising
background image

24

WWW.PRIDEMOBILITY.COM

JAZZY 1122/REV D/FEB 03

V I . C O M F O R T A D J U S T M E N T S

Once you are familiar with your Jazzy’s operation, you may find the need

to adjust your seating position. There are some adjustments you can make

to increase your comfort, such as seat height and angle, armrest width,

armrest angle and height, joystick position, and footrest height, depth and

angle.

CAUTION! If your Jazzy was configured at your au-

thorized Pride provider or service center, please con-

sult your health care professional before changing

the seat position or making any other adjustment.

Some adjustments may degrade your Jazzy’s perfor-

mance and safety by changing its center of gravity.

SEAT HEIGHT AND SEAT ANGLE ADJUSTMENT

You can change the seat height to one of five positions in 1-in. increments.

To change the seat height or seat angle:
1. Unplug the electrical connector(s).

2. Remove the seat. See “Seat Removal.”

3. Remove the power base front cover.

4. Use a slotted screwdriver to rotate the power base middle cover fas-

teners one-quarter turn and remove the power base middle cover.

5. Remove the ball detent pin from each of the four seat posts. See figure 14.

6. Raise or lower each seat post to the desired position. To change the

angle (dump), set either the front or rear seat posts higher or lower

than the other.

7.Reinstall the ball detent pin into each seat post.

8.Reinstall the power base middle cover and front cover.

9.Reinstall the seat.

10.Plug the connectors into the electronics tray.

SEATBACK ANGLE ADJUSTMENT

If your power chair is equipped with an adjustable seatback, you can

adjust it to four (4) different angles: 90°, 102°, 105°, or 107°.

To adjust the seatback angle:
1. Use a hex key and a wrench to remove the adjusting screws on both

seat hinges. See figure 15.

2. Set the seatback at desired angle.

3. Reinstall the screws on both seat hinges and tighten.

Figure 14. Seat Height

Figure 16. Armrest Width

ADJUSTMENT KNOBS

BALL DETENT

Figure 17. Armrest Angle

ADJUSTING

SCREW

JAM NUT

Figure 15. Seatback Angle

SEAT

TOWER

SEAT

HINGE

BOLT

Advertising