Pride Mobility Jazzy 1122 User Manual

Page 27

Advertising
background image

JAZZY 1122/REV D/FEB 03

WWW.PRIDEMOBILITY.COM

27

ELEVATING LEG RESTS OPTION

Elevating Leg Rests (ELRs) offer an infinite range of adjustment

between 0º – 70º for the leg angle and a leg rest adjustment range of

15 – 20 in.

To adjust the ELR angle:
1. Press the ELR release lever. See figure 24.

2. Move the leg rest to the desired angle.

To adjust the ELR length:
1. Remove the two screws from the side of each leg rest exten-

sion. See figure 25.

2. Slide the leg rest in or out to the desired length.

3. Reinstall the two screws on each leg rest extension.

RECLINING SEAT OPTION

If your Jazzy is equipped with a reclining seat (see figure 26), you

can adjust the seatback angle and the armrest angle.

To adjust the seatback angle:
1. Press down on the seatback release lever. See figure 27.

2. Move the seatback down or up to the desired position.

3. Release the seatback release lever.

To adjust the armrest angle:
Refer to “Armrest Angle” earlier in this section.

POWER ELEVATING SEAT OPTION

If your Jazzy is equipped with a power elevating seat, you can change

the seat height automatically. The seat height switch is located either

on the armrest (Pilot or Europa controllers), or on the joystick (Re-

mote Plus or Dolphin controllers).

To change the seat height:
1. Press forward on the power seat switch to raise the seat. See

figure 28.

2. Pull back on the power seat switch to lower the seat.

CAUTION! Do not allow the motor to run more

than a few seconds after the mechanism

reaches the top or bottom limit.

V I . C O M F O R T A D J U S T M E N T S

Figure 24. Elevating Leg Rests

Figure 25. Elevating Leg Rests

Figure 26. Reclining Seat

ELR

RELEASE

LEVER

LEG REST

ADJUSTMENT SCREWS

Advertising