Pride Mobility Jazzy 1122 - Manual (Page 26)

26 WWW.PRIDEMOBILITY.COM JAZZY 1122/REV D/FEB 03
V I . C O M F O R T A D J U S T M E N T S
SWING-AWAY JOYSTICK
Your Jazzy may be equipped with a swing-away joystick. This
option enables you to move the joystick from the front of the arm-
rest to the side of the armrest, without disconnecting it. See figures
19 and 20.
The joystick can be mounted to the left or right side of your Jazzy.
Contact your authorized Pride provider.
FOOTREST HEIGHT
The footrest height is easily adjusted to one of six different heights
in 1-in. increments.
To raise or lower the footrest:
1. Remove the nuts and bolts from bracket. See figure 21.
2. Raise or lower the footrest to the desired height.
3. Reinstall the bolts and nuts into the footrest bracket and tighten.
FOOTREST DEPTH
To adjust the footrest depth:
1. Remove the nuts and bolts from the bracket. See figure 21.
2. Move the footrest in or out to the desired depth.
3. Reinstall the nuts and bolts into the bracket and tighten.
FOOTREST ANGLE
You can adjust the angle of the footrest with a 3/16-in. hex key.
See figure 22.
To adjust the footrest angle:
1. Turn the setscrew clockwise to raise the front of the footrest.
2. Turn the setscrew counterclockwise to lower the front of the footrest.
SWING-AWAY FOOTRESTS OPTION
Swing-away footrests (SFRs) are an option. They enable you to
swing the footrest to the side before transferring from your Jazzy.
To swing the footrests:
1. Push in the SFR release lever. See figure 23.
2. Swing the footrest off to the side.
Figure 21. Footrest Height
NUTS AND BOLTS
Figure 22. Footrest Angle
SETSCREW
Figure 23. Swing-Away Footrests
SFR
RELEASE
LEVER