Paxar 9445 - Manual (Page 17)

3. If you are reloading supply:
a. Cut the backing paper in front of the paper take-up
spool, and then manually rewind the supply roll.
b. While holding the backing paper with one hand, turn
the take-up spool knob counterclockwise about 1/4 turn
with the other hand.
c. Slide the backing paper off the take-up spool.
4. Push the lock to the right to unlock the outer supply holder
and remove the outer supply holder from the supply shaft.
Remove the old supply core, if there is one.
5. Remove labels from the first 16 inches of backing paper
(on the new supply roll).
Backing
Paper Outer Supply
Holder Paper Take-up
Spool Lock
L
o
ad
ing
S
u
pp
lies
2. Loading Supply
2-9