Paxar 9445 - Manual (Page 28)

Adjusting the On Demand Sensor
The On Demand sensor stops the printer between tags or
labels when you print in the On Demand mode. The sensor
detects the presence of supply in the exit chute of the printer.
When you remove the tag or label, another tag or label prints.
NOTE: The On Demand sensor must be positioned over a
white or light area on the supply. If it is positioned
over a dark area, the entire batch may print before the
printer stops.
You can adjust the On Demand sensor either right or left by
pushing it with your finger.
On Demand
Sensor
9445 Equipment Manual
2-20