Paxar 9445 - Manual (Page 25)

6. With one hand, hold down the lower supply guide. With
the other hand, feed the backing paper between the upper
and lower guides, past the printhead, and then out through
the exit chute.
7. Close the printhead by turning the printhead lever to the
right.
8. Place an empty box below the printer’s exit chute to catch
the labels as they are printed.
NOTE: Check the stack of printed labels a few times during
the print job to make sure the labels fold at the same
points at which they were folded before printing. If
you remove some or all of the printed labels, check
that the order of the folds is correct before you
resume printing.
Box for
fan-fold
labels
Space supply at
least one fan-fold
length from printer
Box of new
labels
L
o
ad
ing
S
u
pp
lies
2. Loading Supply
2-17