Panasonic WV-NP1004 - Manual (Page 9)

9
• When using an unformatted SD memory card, format it
using this camera.
Recorded data on the SD memory card will be deleted
when formatted.
If using an unformatted SD memory card or using an
SD card formatted with other device, the camera may
not work properly or performance deterioration may be
caused.
Refer to the Network Operating Instructions (PDF) for
descriptions of how to format an SD memory card.
• It is recommended to use Panasonic's SD memory
card.
Otherwise, the camera may not work properly or perfor-
mance deterioration may be caused.
• Images saved on the SD memory card may lead to per-
sonal information leakage. When it is necessary to give
the camera to someone, even when for repair, make
sure the SD memory card is removed from the camera.
Do not aim the camera at strong light sources.
A light source such as a spot light causes a blooming (light
bleeding) or a smear (vertical lines).
Router
When connecting the camera to the Internet, use a broad-
band router with the port forwarding function (NAT, IP mas-
querade).
Refer to the Network Operating Instructions (PDF) for fur-
ther information about the port forwarding function.
Radio interference
When the camera is used near TV/radio antenna, strong
electric field or magnetic field (near a motor or a trans-
former), images may be distorted and noise sound may be
produced.
Safety wire
The safety wire holder is provided on the top of the camera.
To prevent the camera from dropping that may cause acci-
dental injury, attach one end of a safety wire (locally pro-
cured) to the safety wire holder of the camera and the other
end to a locally procured safety wire holder (bracket, etc.)
to be installed on the foundation part of the building.
Do not install the camera in a humid or dust-laden envi-
ronment.
Otherwise, lifetime of the internal parts may be shortened.
Smear Blight subject
Blooming
Do not strike or shake, as this may damage the appli-
ance.
It may cause a malfunction.
Save the configured settings
We recommend that you note down your settings and save
them. We assume no responsibility whatever for any dam-
ages resulting from a lost of your settings.
Distributing, copying, disassembling, reverse compil-
ing, reverse engineering, and also exporting in violation
of export laws of the software provided with this prod-
uct, is expressively prohibited.