Monitor settings – POLAR S725 User Manual

Page 43

Advertising
background image

B

41

Options

Monitor Set

Sound On/OFF

Units 1/2

Help On/OFF

Monitor settings

1. In the Time of day display

scroll up or down until
OPTIONS is displayed.

2. Press OK to enter the

Options mode. EXERCISE
SET is displayed.

3. Scroll up or down until MONITOR SET is displayed.
4. Press OK to start the monitor settings. Sound is displayed.

Turning activity/button sound on/off
If you start from the Time of day display, repeat steps 1-4.
5. Press OK to start setting the sound. On/OFF starts to flash.
6. Scroll up or down to set sound On or Off. Press OK.

Activity/button sound consists of the button sound and in the Measuring
and Recording modes the following activity sounds: start, stop and lap
recording, phase start, interval phase end and recovery calculation end
sounds. It does not consist of heart rate zone alarms, watch alarm or fitness
test alarm.

Selecting measuring units
If you start from the Time of day display, repeat steps 1-4.
5. Scroll up or down until Units is displayed.
6. Press OK to start setting the units. 1 or 2 starts to flash.
7. Scroll up or down the unit which best suits you. Press OK.

Advertising