POLAR S725 - Manual (Page 57)

C 55
*Optional Polar Cadence Sensor or
Polar Power Output Sensor required.
You can configure the middle and upper rows either in the Measuring
and Recording mode.
1. Select the middle row information
Press the down button briefly to select the desired display alternative.
When you swap the middle row information, the upper and lower rows
change also. Continue selecting the upper and lower rows.
2. Select the upper row information
Press the up button briefly to select from the following:
Time of day (Time), stopwatch (Sw), lap time (Lp),
or if you have turned the functions on select from:
calorie expenditure (Cal), trip (Trip), current speed (Spd), average speed
(Avg speed), maximum speed (Max speed), cadence* (Cad), altitude
(Alt), ascended meters (Asc), output power* (Pwr), left right pedaling
balance* (L - R), pedaling index* (PI).
You cannot select the same displayed function to the upper and middle row
i. e. the option on the middle row is no longer available for the upper row.
Phase Name
Countdown
timer
When you have set your Interval
Training Set on, you will have one
extra display. You can only change the
lower row for this display. See the
alternative phase displays from
“Exercising with Interval Training Set”
section.