POLAR S725 User Manual

Page 92

Advertising
background image

2. Remove the battery cover from the connector, lift the battery from the

niche and replace it with a new battery.

3. Remove the sealing ring of the battery cover and replace it with a new

ring.

4. Place the negative (-) side of the battery against the connector and the

positive (+) side against the cover.

5. Put the battery in the connector's niche and put the cover on so that the

arrow points to the OPEN position. Make sure that the cover's sealing
ring is placed correctly in its groove.

6. Gently press the cover deep enough so that its exterior surface is on the

same level as the connector's surface.

7. Turn the cover clockwise so that the arrow on the cover turns from OPEN

to CLOSE. Make sure that the cover is closed properly!

In order to ensure the maximum life span of the connector’s battery
cover, open it only when you need to change the battery. We
recommend that you change the sealing ring of the battery cover every
time you change the battery. You can get the sealing ring/battery kits
from well-equipped Polar retailers and authorized Polar Services. In the
USA and Canada: Additional sealing rings are available from an
authorized Polar Service Center only.

F 90

Advertising