Panasonic SC-RT50 - Manual (Page 12)

12
RQT8655
Recording television programs
[RAM] [-R] [-R]DL] [-RW‹V›]
pYou can record up to 99 titles on one disc.
[+R] [+R]DL] [+RW]
pYou can record up to 49 titles on one disc.
[SD]
pIt is not possible to record onto a card.
See also the notes “Important notes for recording”( ➡ page 10)
]Note]
p [RAM] It is not possible to record continuously from one side of a
double sided disc to the other. You will need to eject the disc and
turn it over.
p [+RW] You can create a Top Menu using “Create DVD Top Menu” (➡
page 33). Recording or editing on the disc may delete the menu. In
that case, create the menu again.
Preparation
pTurn on the television and select the appropriate video input to suit
the connections to this unit.
pTurn the unit on.
1
Press [THEATER] to switch the remote
control to operate this unit.
2
Press [DRIVE SELECT] to select the
DVD drive.
The main unit: Press [SELECTOR] to select the DVD drive.
3
Press [ OPEN/CLOSE] on the main
unit to open the tray and insert a disc.
pPress the button again to close the tray.
pWhen using 8 cm (3
″) DVD-RAM, or 8 cm (3″) DVD-R,
remove the disc from the cartridge.
4
Press [ 9 : CH] to select the channel.
To select with the numbered buttons:
Antenna
Cable TV
e.g., 5: [0] ➔ [5] e.g., 5: [0] ➔ [0] ➔ [5]
15: [1] ➔ [5] 15: [0] ➔ [1] ➔ [5]
115: [1] ➔ [1] ➔ [5]
pSelect the audio to record ( ➡ page 13).
5
Press [REC MODE] to select the
recording mode (XP, SP, LP, or EP).
6
Press [ q REC] to start recording.
The elapsed time is shown on the display.
Recording will take place on free space on disc. Data will not
be overwritten.
pYou can adjust the volume using [A B VOLUME]. Adjusting
the volume will not affect the recorded audio.
pYou cannot change the channel or recording mode during
recording. You can change the channel or recording mode
while paused; however, the recording will then be as a
separate title.
pYou can record while the unit is in standby for scheduled
recording, but once the time for the scheduled recording to
begin is reached, any recording taking place will stop and
the scheduled recording will begin.
w To pause recording
Press [ ].
Press again to restart recording.
You can also press [
q REC] to restart.
(Title is not split into separate titles.)
w To stop recording
Press [ w].
pFrom the start to the end of the recording is called one title.
p [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW]
It takes about 30 seconds for the unit to complete recording
management information after recording finishes.
w When recording the channel (not set on this
unit) from cable box or satellite receiver
 Select the channel on the equipment before turning the unit on.
 Press [
9: CH] to select IN1 or IN2 in step 4 ( ➡ above).
Off Timer
The unit switches to standby after about 6 hours in the stop
mode. You can turn this feature off or change the time to 2
hours (
➡ page 37, “Off Timer”).
SRD MUSIC
5
6
2
4
1
6
w
2 3
4 
, , , 
ENTER
F Rec
Numbered
buttons
■
STATUS
DIRECT
NAVIGATOR
AUDIO
A B VOLUME
RETURN
A B VOLUME

INPUT
Insert label-up.
Insert fully so it clicks into place.
w Cartridge disc
Insert label-up with
the arrow facing in.
Remaining time on the disc