Panasonic SC-RT50 - Manual (Page 8)

8
RQT8655
Inserting/Removing SD card
When the card indicator (“SD”) on the unit’s display is flashing, the card is being read from or written to. Do not turn off the unit or remove the card.
Such action may result in malfunction or loss of the card’s contents.
pInserting foreign objects can cause a malfunction.
pYou can use SD Memory Cards with capacities from 8 MB to 2 GB (
➡ page 7).
Automatic drive select function
If you insert an SD card while the unit is stopped, the “SD Card Operations” screen is displayed. Select an item and press [ENTER] to switch to
the SD drive (
➡ page 18, 28).
If you remove an SD card, the DVD drive is automatically selected.
w How to hold a disc or card
Do not touch the recorded
surface or the terminal surface.
w Concerning non-cartridge discs
Be careful about scratches and dirt.
w If there is dirt or condensation on the disc
Wipe with a damp cloth and then wipe dry.
w Handling precautions
pDo not attach labels or stickers to discs. (This may cause disc
warping and un-balanced rotation, rendering it unusable.)
pWrite on the label side of the disc only with a soft, oil-based felt
pen. Do not use ballpoint pens or other hard writing implements.
pDo not use record cleaning sprays, benzine, thinner, static
electricity prevention liquids or any other solvent.
pDo not use scratch-proof protectors or covers.
pDo not expose the terminals of the card to water, garbage or other
strange things.
pDo not drop, stack, or impact discs. Do not place objects on them.
pDo not use the following discs:
–Discs with exposed adhesive from removed stickers or labels
(rental discs, etc.).
–Discs that are badly warped or cracked.
–Irregularly shaped discs, such as heart
shapes.
pDo not place in the following areas:
–In direct sunlight.
–In very dusty or humid areas.
–Near a heater.
–Locations susceptible to significant differences in temperature
(condensation can occur).
–Where static electricity or electromagnetic waves occur.
pTo protect discs from scratches and dirt, return them to their cases
or cartridges when you are not using them.
The precision parts in this unit are readily affected by the
environment, especially temperature, humidity, and dust.
Cigarette smoke also can cause malfunction or breakdown.
To clean this unit, wipe with a soft, dry cloth.
pNever use alcohol, paint thinner or benzine to clean this unit.
pBefore using chemically treated cloth, carefully read the
instructions that came with the cloth.
Observe the following points to ensure continued listening and
viewing pleasure.
Dust and dirt may adhere to the unit’s lens over time, making it
impossible to record or play discs.
Use the DVD lens cleaner (RP-CL720PP) about once every year,
depending on frequency of use and the operating environment.
Carefully read the lens cleaner’s instructions before use.
ADAPTER
Opening the cover
Press the protruding part
to open the cover.
Inserting the card
Press on the center of
the card until it clicks into
place. If you are using a
miniSD™ card, insert
it into the miniSD™
card adaptor that
comes with the card.
Insert and remove
this adaptor from the
unit.
Removing the card
 Press on the center
of the card.
 Pull it straight out.
Closing the cover
Press down.
Insert the card label up with the cut-off corner on the right.
(Do not forget to close the cover.
➡ right)
Keep the small memory cards such as the SD Memory Card out of reach of children. If swallowed, seek
medical advice immediately.
Disc and card handling
Unit care
Before moving the unit, ensure the disc tray is empty.
Failure to do so will risk severely damaging the disc
and the unit.
Do not place the unit on
amplifiers or equipment
that may become hot.
The heat can damage the unit.