Copying from a video cassette recorder, Press [rec mode] to select the recording mode, Start play on the other equipment – Panasonic DMR-XW300 User Manual

Page 54: Press [ ¥ rec, Manual recording

Advertising
background image

54

RQT9135

Copying from a video cassette recorder

e.g., Connecting to the AV3 or DV input terminals on the front

≥Turn off the unit and other video equipment before connecting.

If the audio output of the other equipment is monaural
Connect to L/MONO on the AV3 input terminals at the front.

§

The S VIDEO terminal achieves a more vivid picture than the
VIDEO terminal.

When recording from the unit’s DV terminal
≥Use only DV cable with ferrite core.

≥Select the type of audio recording from “Audio Mode for DV Input”

in the Setup menu (

➡ 83).

≥When recording from DV equipment (e.g., digital video camcorder),

you can record audio/video recordings from DV tape only.

≥When “Rec for High Speed Copy” (

➡ 82) is set to “On” and you

make a copy, the copy will be made using the picture size selected
in “Aspect for Recording” (

➡ 82) of the Setup menu.

Recording of 16:9 image such as wide broadcasting (

28)

[Note]

≥If video is copied from another piece of equipment to this unit, then

the video quality will be degraded.

≥While copying from DV input or executing the “Recording via AV3

input”
– Copy will stop when timer recording starts.
– Chasing playback, simultaneous rec and play, switching of the

broadcast or input cannot be performed.

[HDD]
Preparation

≥Press [DRIVE SELECT] to select the HDD drive.

≥When recording bilingual programmes (

➡ 28, Important notes for

recording)

≥When the output signal from the external equipment is NTSC,

change the “TV System” to “NTSC” in the Setup menu (

➡ 84).

1

While stopped

Press [INPUT SELECT] to select the
input channel for the equipment you
have connected.

e.g., If you have connected to AV3 input terminals, select
“AV3”.

2

Press [REC MODE] to select the
recording mode.

≥DR, FR mode cannot be selected.

3

Start play on the other equipment.

4

When you want to start recording

Press [

¥ REC].

Recording starts.

To skip unwanted parts
Press [

;] to pause recording. (Press again to restart recording.)

To stop recording
Press [

∫].

Using Flexible Recording (

32)

L/MONO - AUDIO- R

VIDEO

S VIDEO

DV IN

AV3 IN

Audio/Video
cable

S Video

cable

§

Yellow White Red

This unit

Other video equipment

Connect to Audio/Video output terminals.

DV cable

(IEEE 1394, 4-pin)

Manual recording

Almost all videos and DVD-Video on sale have been treated
to prevent illegal copying. Any software that has been so
treated cannot be recorded using this unit.

DMRXW300GN-RQT9135-L_eng.book 54 ページ 2008年4月30日 水曜日 午後6時11分

Advertising