Additional connections, Regarding viera link “hdavi control, Function – Panasonic DMR-XW300 User Manual

Page 92

Advertising
background image

92

RQT9135

Additional connections

When connected to an HDMI compatible unit, an uncompressed digital audio and video signal is transmitted. You can enjoy high quality, digital
video and audio with just one cord. When connecting to an HDMI-compatible HDTV (High Definition Television), the output can be switched to
1080p, 1080i or 720p HD video.
≥Video sources converted to 1920k1080 resolution, while of high quality, will exhibit somewhat lower subjective image resolution than true,

native 1080p full-HD sources. See dealer for details.

≥Please use High Speed HDMI Cables that have the HDMI logo (as shown on the cover).

≥When outputting 1080p signal, please use HDMI Cables 5.0 meters or less.

[Note]

≥If you are connecting to a TV that is only compatible with 2 channel audio output, audio with 3 channels or more will be down mixed (

➡ 110) and

output as 2 channels, even if connecting with an HDMI cable. (Some discs cannot be down mixed.)

≥You cannot connect this unit to DVI devices that are incompatible with HDCP.

For units compatible with HDCP (High-Bandwidth Digital Content Protection) copyright protection that are equipped with a digital DVI input
terminal (PC monitors, etc.):
Depending on the unit, images may not display properly or at all when connecting with a DVI/HDMI switching cable. (Audio cannot be output.)

Connecting with an HDMI compatible television and receiver

Regarding VIERA Link “HDAVI Control

TM

” function

When connecting with a Panasonic TV (VIERA) or a receiver equipped with the “HDAVI Control” function, linked operations would be
possible. [

➡ 72, Linked operations with the TV (VIERA Link “HDAVI Control

TM

”)]

Non-HDMI-compliant cables cannot be utilised.

It is recommended that you use Panasonic’s HDMI cable.

Recommended part number:
RP-CDHG10 (1.0 m), RP-CDHG15 (1.5 m), RP-CDHG20 (2.0 m), RP-CDHG30 (3.0 m), RP-CDHG50 (5.0 m), etc.

RF

RF
IN

IN

RF

RF
OUT

OUT

A V2 ( EXT )

A V 1

( TV )

OPTICAL

COAXIAL

COMPONENT

COMPONENT

VIDEO OUT

VIDEO OUT

OUT O

U

T

A

V

4 I

N

A

V

4

I

N

S VIDEO

VIDEO

R- A UDIO- L

P

R

P

B

Y

AV OU

V OUT

L A N

L A N

10BASE-T/

100BASE-TX

DIGITAL

DIGITAL

AUDIO OUT

AUDIO OUT

(PCM/BITSTREAM)

(PCM/BITSTREAM)

HDMI IN

HDMI IN

HDMI OUT

HDMI AV OUT

This unit’s rear panel

HDMI cable

HDMI cable

Television’s rear panel

Receiver’s rear
panel

[Required]setting]
≥Set “HDMI Video Mode” and “HDMI Audio

Output” to “On” (

➡ 85).

(The default setting is “On”.)

DMRXW300GN-RQT9135-L_eng.book 92 ページ 2008年4月30日 水曜日 午後6時11分

Advertising