Panasonic DMR-XW300 - Manual (Page 94)

94
RQT9135
Additional connections
Following function will be available when this unit is connected to the network.
≥This document is assuming that you already have a broadband connection.
≥This connection is not necessary if following functions are not to be used.
[Note]
≥Refer to the operating instructions for the connected device.
≥It may not work properly depending on the equipment or environment used.
≥Depending on the contract with the provider, you may not be able to connect multiple numbers of terminals such as this unit or computers, or an
additional fee might be required.
≥Use only shielded LAN cables when connecting to peripheral devices.
Network connection
Automatically acquire the
title of the CD Automatically acquire the title of the CD or the information about the artist. ( ➡ 69)
Update the software of this
unit Automatically update the software of this unit. ( ➡ 90)
≥Update of the software can be done from the broadcast too.
≥Make the necessary settings in “Network Settings” after connecting. ( ➡ 87)
RF RF
IN IN
RF RF
OUT OUT
AV2 (EXT)
AV1 (TV)
OPTICAL COAXIAL
COMPONENT COMPONENT VIDEO OUT VIDEO OUT
OUTO U T
A V 4 I N
A V 4 I N
S VIDEO VIDEO R-AUDIO-L
PR PB Y
AV OU V OUT
L A N L A N
10BASE-T/ 100BASE-TX
DIGITAL DIGITAL AUDIO OUT AUDIO OUT (PCM/BITSTREAM) (PCM/BITSTREAM)
This unit’s rear panel
Internet
Straight LAN cable
Hub or broadband router
Telecommunications
equipment (modem, etc)
≥When your communication equipment (modem), etc. has no
broadband router functions: Connect a broadband router.
When your communication equipment (modem), etc. has
broadband router functions but there are no vacant ports:
Connect a hub.
≥Use a router that supports 10BASE-T/100BASE-TX.
DMRXW300GN-RQT9135-L_eng.book 94 ページ ２００８年４月３０日 水曜日 午後６時１１分