Panasonic DMR-XW300 - Manual (Page 98)

98
RQT9135
Messages
[-R] [-R]DL] [-RW‹V›] [+R] [+R]DL]
The following screen appears when you have not processed the disc for play on other equipment.
∫ To finalise the disc
Press [ ¥ REC] on the main unit.
≥You cannot stop this process once you have started it.
≥If you want to set the background, play menu select or provide a disc name, select “Top Menu” ( ➡ 79), “Auto-Play Select” (➡ 79) or “Disc Name”
( ➡ 77) in “DVD Management” before finalising.
∫ To open the tray without disc finalisation
Press [ < OPEN/CLOSE] on the main unit.
On the television Page
Cannot finish recording completely. ≥The programme was copy-protected.
≥The HDD or disc may be full.
≥The maximum number of programme has been exceeded.
—
—
31
Cannot playback.
TV system is different from the
setting.
To playback, please change the TV
System in Setup. ≥You tried to play a title recorded using a different encoding system from that of the TV
system currently selected on the unit.
Alter the “TV System” setting on this unit to suit.
84
Cannot record to the disc. ≥The disc may be dirty or scratched. 15
Cannot format.
Cannot play on this unit. ≥You tried to play a non-compatible image.
≥Turn the unit off and re-insert the card.
109
15
Cannot record. Disc is full. ≥[HDD] [RAM] [-RW‹V›] [+RW] Create space by deleting any unnecessary titles.
[Even if you delete recorded content from the DVD-R, DVD-R DL, +R or +R DL there is
no increase in disc space. Available space on DVD-RW (DVD-Video format) and +RW
increases only when the last recorded title is deleted.]
≥Use a new disc.
26, 43,
78
—
Cannot record. Exceeds maximum
number limit of titles allowed.
No Disc ≥The disc may be upside down. —
No folders. ≥There is no compatible folder in this unit. 111
No SD CARD
No valid SD card. ≥The card is not inserted. If this message is displayed with a compatible card already
inserted, turn off the unit, remove and then re-insert the card.
≥The card inserted is not compatible or the card format does not match.
15
109
Not enough space in the copy
destination. ≥Create space by deleting any unnecessary items.
≥Delete one or more items registered on the copy list to ensure that the “Destination
Capacity” is not exceeded.
26, 43,
78
51, 63
The disc is not recordable. ≥The unit cannot record on the disc you inserted. Insert an unfinalised disc.
≥You inserted an unformatted disc.
—
78
This disc is not formatted properly.
$ This operation cannot be
performed now. ≥The operation is prohibited by the unit or disc. —
When removing a recorded disc
Finalise
Press the REC button to start finalise.
Press the OPEN/CLOSE button to exit.
This disc cannot be played on other players
without finalising.
Finalise the disc to enable playing on other
DVD players.
Note: Recording or Editing is not possible
after finalising. This may take up to min.
Finalise the disc ?
DMRXW300GN-RQT9135-L_eng.book 98 ページ ２００８年４月３０日 水曜日 午後６時１１分