Panasonic P2HD AG-HPG20P - Manual (Page 101)

The underlined settings are the factory mode settings.
101
Menu
AV OUT SETUP screen (continued)
Item Description of settings
EMBEDDED AUDIO This is used to set whether to superimpose the audio data onto HD-SDI output and
SD-SDI output.
ON:
Superimpose
OFF:
Not superimpose
AUDIO REF LEVEL This is used to set the normal level.
(AG-HPG0P)
FS-0:
–20dB
FS-1:
–18dB
FS-1:
–12dB
(AG-HPG0E)
FS-0:
–20dB
FS-1:
–18dB
FS-1:
–12dB
SD SDI AUDIO This is used to select the audio channel which is superimposed onto SD-SDI when
HD signal is down-converted and output as SD-SDI signal.
CH1-:
CH1-4 is output to CH1-4.
CH5-:
CH5-8 is output to CH1-4.
CH1-:
CH1-8 is output to CH1-8.
VIDEO SETUP
(This item is displayed only
when 59.94 Hz is set)
The setup level of the video signals during playback is set.
0%:
0% is set as the output setup level.
.5%:
7.5% is set as the output setup level.