Panasonic P2HD AG-HPG20P - Manual (Page 26)

6
LCD monitor settings
1
Hold down [POWER] for at least 1 second to
turn the power on.
First check that an image is displayed on the
LCD monitor, and then adjust the angle of the
monitor to the position where it is easiest to see
its displays.

Press [THUMBNAIL/MODE] to display the
normal display screen.

Press [MENU/MODE CHK].
Basic operations on the setting menus (Page
88)

Using , , and , select “CHANGE” for
the “LCD SETTING” item on the setting
menu “DISPLAY SETUP” screen.
DISPLAY SETUP
PUSH MENU TO RETURN
OSD OUT SEL
DATE/TIME
P2CARD REMAIN
OTHER DISPLAY
LCD BACKLIGHT
LEVEL METER
CARD/BATT
LCD SETTING
OFF
CH1-4
ON
LCD
ON
TOTAL
CHANGE
RETURN
5
Using and , select the item to be set.
LCD SETTING
LCD CONTRAST
LCD BRIGHTNESS
LCD COLOR LEVEL
PUSH MENU TO RETURN
[ + ]
[ + ]
[ + ]
[ ]
_
[ ]
_
[ ]
_
LCD COLOR LEVEL:
This adjusts the color
density of the screen.
LCD BRIGHTNESS:
This adjusts the screen
brightness.
LCD CONTRAST:
This adjusts the screen
contrast.
Note that if you set all LCD adjustment values to
minimum, the menu screen will become difficult
to see.
•
•
Basic operations (continued)
6
Using or , adjust the selected item.
When [RESET] is pressed, the adjusted values of
the selected items can be restored to their factory
settings.

Press [MENU/MODE CHK]  times to return
to the normal display screen.
•