Panasonic P2HD AG-HPG20P - Manual (Page 44)


Clip management (continued)
6
If necessary, reference the clip meta-data
contents.
When the clip meta-data item is selected using
and , and then is pressed, the following
information is displayed.
GLOBAL CLIP
ID:
A unique number which is not
assigned to any other clips
USER CLIP
NAME:
Clip name which can be assigned by
the user
Normally, the GLOBAL CLIP ID is
provided as the clip name.
VIDEO: Video signal system, etc. (frame rate,
pull-down, aspect ratio)
AUDIO: Audio channel system, etc. (sampling
rate, bit rate)
ACCESS: Last update date, etc.
(name of the person who created
the clip and date on which it was
created, date on which the clip was
last updated and name of the person
who last updated the clip)
DEVICE: Serial number of device used to
record the clip, etc. (name of the
device manufacturer, serial number,
model number)
SHOOT: Recording start and end dates, etc.
(name of person who shot the clip,
date on which shooting started, date
on which shooting ended, shooting
location information, altitude,
longitude, latitude, shooting location
information source, shooting location)
SCENARIO: Program name, scene number, etc.
(program name, scene number, take
number)
NEWS: Reporter, news-gathering object, etc.
(reporter, purpose of news gathering,
object of news gathering)
MEMO: Text memo number, recording
position, name, text content
• The recording position is indicated
by the number of frames from
the beginning. On a thumbnail
text memo display, this recording
position is indicated as a time code
instead.
• Texts consisting of up to 1000
characters can be attached, but
only the first 100 characters will
actually be displayed.
• or is used to move from one
text memo number to another.
THUMBNAIL: Information on the thumbnail images
The frame positions and sizes (offset
value from the beginning of the clip,
height and width) of the thumbnail
source images are displayed.

Press [MENU/MODE CHK], and select
“EXIT” to exit.
Displaying the clip information (continued)