Panasonic DMC-FX50 - Manual (Page 58)

Advanced
58
VQT0Y19
5 Move /// to select the
date.
/: Select the desired item.
/: Set the year, month and date.
6 Press [MENU/SET] twice to close
the menu.
7 Take a picture.
: The number of days that have passed
since the departure date
• The current date and time and which
day of the vacation it is are displayed for
about 5 seconds at the bottom of the
screen if the camera is turned on when
the travel date is set, after setting the
clock, departure date or travel date,
after changing the world time setting
and after switching from playback mode
to another mode.
• When [TRAVEL DATE] is set, [ ] ޓ
appears on the lower right of the
screen.
w Canceling the travel date
If you leave [TRAVEL DATE] set to [SET],
the number of days that have passed since
the departure date will continue to be
recorded.
When the vacation is finished, set
[TRAVEL DATE] to [OFF] on the screen
shown in step
4 and then press [MENU/
SET] twice.
• The travel date is calculated using the
date in the clock setting (P17) and the
departure date you set. If you set
[WORLD TIME] (P59) to the travel
destination, the travel date is calculated
using the date in the clock setting and the
travel destination setting.
• The travel date setting is memorized even
if the camera is turned off.
• If you set a departure date and then take a
picture on a date before this departure
date, [-] (minus) is displayed in orange
and the day of the vacation that you took
the picture is not recorded.
• If you set a departure date and then
change the clock setting to the date and
time at the travel destination, [-] (minus) is
displayed in white and the day of the
vacation that you took the picture is
recorded when the travel destination date
is, for example, one day before the
departure date.
• If [TRAVEL DATE] is set to [OFF], the
number of days that have passed since
the departure date will not be recorded
even if you set the travel date or the clock.
Even if [TRAVEL DATE] is set to [SET]
after taking the pictures, which day of the
vacation you took them is not displayed.
• If you set a departure date when the clock
is not set, the message [PLEASE SET
THE CLOCK] appears. In this case, set
the clock. (P17)
• The [TRAVEL DATE] setting also affects
simple mode [ ].
DEC 1 2 2006 . .
TRAVEL DATE
SELECT SET EXIT MENU
PLEASE SET THE
DEPARTURE DATE.
3
10:00 DEC. 2.2006