Panasonic DMC-FX50 - Manual (Page 84)

Menu Settings
84
VQT0Y19
w Rotate
(The picture is rotated manually.)
1 Move   to select the picture
and then move .
• The [ROTATE] function is disabled
when [ROTATE DISP.] is set to [OFF].
• Motion pictures and protected pictures
cannot be rotated.
2 Move   to select the direction
to rotate the picture and then
press [MENU/SET].
3 Press [MENU/SET] twice to close
the menu.
w Example
When rotating clockwise (
)
Original
picture
• When [ROTATE DISP.] is set to [ON],
pictures recorded holding the camera
vertically are played back vertically
(rotated).
• If you take pictures when aiming the
camera up or down, it may not be possible
to display the pictures vertically. (P24)
• The picture may be slightly blurred when
the camera is connected to the TV with
the AV cable (supplied) and played back
vertically.
• When you play back pictures on a PC,
they cannot be displayed in the rotated
direction unless the OS or software is
compatible with Exif. Exif is a file format
for still pictures which allows recording
information etc. to be added. It was
established by “JEITA (Japan Electronics
and Information Technology Industries
Association)”.
• Rotated pictures are displayed rotated
when they are played back in review
playback and playback zoom however are
displayed without being rotated when they
are played back in multi playback.
• It may not be possible to rotate pictures
that have been recorded with other
equipment.
The picture rotates clockwise in
steps of 90°.
The picture rotates
counter-clockwise in steps of 90°.
ROTATE
SELECT SET
1 / 3
EXIT MENU
ROTATE
SELECT SET MENU CANCEL /SET
MENU