Motion picture mode, 2 press the shutter button fully to stop recording – Panasonic DMC-FX50 User Manual
Page 62
Advanced
62
VQT0Y19
Motion Picture Mode
1 Press the shutter button halfway
to focus and then press it fully to
start recording.
• When the subject is focused, the focus
indication lights.
• The focus, zoom and aperture value are
fixed to the setting when recording
starts (the first frame).
• The available recording time
is
displayed on the top right and the
elapsed recording time
is displayed
on the bottom right of the screen.
For example, 1 hour 20 minutes and
30 seconds is displayed as
[1h20m30s].
• The available recording time and the
elapsed recording time are
approximations.
• Audio recording starts simultaneously
from the camera’s built-in microphone.
• When using the stabilizer function, it is
fixed to [MODE1].
2 Press the shutter button fully to
stop recording.
• If the card becomes full in the middle of
recording, the camera stops recording
automatically.
w Changing the settings for the aspect
ratio and the picture quality
1 Press [MENU/SET].
2 Move to select
[ASPECT RATIO] and then move
.
3 Move to select the item and
then press [MENU/SET].
4 Move to select [PICT.MODE]
and then move
.
5 Move to select the item and
then press [MENU/SET].
If you selected [
] on the screen
shown in step
2
If you selected [
] on the screen
shown in step
2
R 3
Item
Picture size
fps
[30fpsVGA]
640
M480 pixels
30
[10fpsVGA]
10
[30fpsQVGA]
320
M240 pixels
30
[10fpsQVGA]
10
Item
Picture size
fps
[30fps16:9]
848
M480 pixels
30
[10fps16:9]
10
AUTO
W.BALANCE
REC
AF MODE
PICT.MODE
AF ASSIST LAMP
ON
SELECT
SET
MENU
ASPECT RATIO
1
/
2
AUTO
W.BALANCE
REC
AF MODE
AF ASSIST LAMP
ON
SELECT
SET
MENU
ASPECT RATIO
PICT.MODE
1
/
2