Panasonic DMC-FX50 - Manual (Page 66)

Advanced
66
VQT0Y19
Using the Playback
Zoom
1 Rotate the zoom lever towards
[ ] [T] to enlarge the picture.
• : 1 M2M4M8M16M
• When you rotate the zoom lever
towards [ ] [W] after enlarging the
picture, the magnification becomes
lower. When you rotate the zoom lever
towards [
] [T], the magnification
becomes higher.
• When you change the magnification,
the zoom position indication  appears
for about 1 second so that you can
check the position of the enlarged
section.
2 Move    to move the
position.
• When you move the position to be
displayed, the zoom position indication
appears for about 1 second.
w To stop using the playback zoom
Rotate the zoom lever towards [
] [W] or
press [MENU/SET].
w To delete a picture during the
playback zoom
1 Press [ ].
2 Move  to select [YES].
3 Press [MENU/SET].
• Even if the indications on the screen are
turned off in normal playback mode (P35),
the magnification and operation appear on
the screen when the playback zoom is
activated. You can switch between
displaying or not displaying the indications
on the screen by pressing [DISPLAY].
When you set the magnification to 1
M, the
indications on the screen are displayed as
in normal playback mode.
• The more a picture is enlarged, the more
its quality deteriorates.
• If you want to save the enlarged picture,
use the trimming function. (P89)
• The playback zoom may not operate if
pictures have been recorded with other
equipment.
CANCEL
4X
2X
DELETE
T W
CANCEL
4X
2X
DELETE