Perle Systems P840 - Manual (Page 30)

Event Logs
30
* Closing remote site X (usage limit)
Generated due to reaching usage limit for this 24 hour period.
* Config. erase failed
Generated when, during a software update, the device configuration is not erased from the non-volatile
memory within the time limit. Possible hardware fault.
* Configuration saved
Generated when the save configuration option has been activated.
* Configuration too large to be saved
Generated when the bridge/router attempts to save a configuration that does not fit in the reserved area of
non-volatile RAM.
* Connection to LAN X failed, trying ...
Generated when failure of the LAN interface external loopback test is detected.
*Count overflow. Reset to history size.
Generated when the number of events since the event log was cleared exceeds the counter capacity (32,768). Event
numbers will start over again from 1.