Perle Systems P840 - Manual (Page 37)

Event Logs
37
* Old download method! Load in \”*.all\” file
Generated when an attempt is made to load a *.fcs or *.lda format program file into hardware which will only accept
*.all format code.
* Old format configuration, using default
Generated when the saved configuration does not match the expected correct revision number. The old
configuration formats will not be used.
* Outgoing call number X too long
Generated when an outgoing call has been attempted in which the number of dialed digits exceeds the limit.
* POP2/POP3 server added to firewall
The IP address of the POP2/POP3 server added to the table of services available through the firewall.
* POP2/POP3 server removed from firewall
The IP address of the POP2/POP3 server removed from the table of services available through the firewall.
* Remote Site <remote site alias> already active
Generated when a connection is attempted to a remote site that is busy.
* Remote Site <remote site alias> already connected
Generated when a connection is attempted to a site that is already connected to this router.
* Remote site <remote site alias> connected
Generated when the specified remote site has been connected for connection management.
* Remote site <remote site alias> resumed
Generated when the connection to the specified remote site has been resumed.
* Remote Site <remote site alias> starting callback
Generated when an ISDN call is being initiated to a remote site in response to a callback request.
* Remote Site <remote site alias> still closing
Generated when a connection is attempted to a remote site whose link is still in the process of being disconnected.
* Remote site <remote site alias> suspended
Generated when the connection to the specified remote site has been suspended.
* Remote site <remote site alias> terminated
Generated when the connection to the specified remote site has been terminated for connection management.
* Results of IPCP negotiation are incompatible
Generated when IPCP negotiations with a remote site PPP router result in a incompatible IP configuration.
The remote site is then disconnected.