Panasonic BT-LH1760E - Manual (Page 13)

13
How to Use the On Screen Menu
(continued)
• Use the menu to open and set up functions.
• When “FUNCTION DISPLAY” (
J page 23) is set to
ON, press any of the “FUNCTION1” to
“FUNCTION5” buttons to display the functions
assigned to the FUNCTION buttons.
• This display disappears after 2 seconds of inaction.
• “XXXXX” indicates operating status (
J page 25,
“Functions displayed during FUNCTION button
operation”).
• A white skeleton bar meter indicates the audio level
for SDI signals.
• You can switch the level display on/off and set the
number of displayed channels using the menu.
• The 0 dB line and channel display can be switched
on/off from the menu.
• This is the menu display.
• It disappears after 2 minutes of inaction.
• You can change position of the display (
J page 22,
“MENU POSITION”).
FUNCTION display
F1:MARKER
F2:WFM/VECTOR
F3:PIXEL TO PIXEL
F4:TIME CODE
F5:LEVEL METER
XXXXX
Audio level meter display
1 1
3 3
5 5
7 7
2 2
4 4
6 6
8 8
Channel
display Level
display 0 dB line
Menu display
[MAIN MENU]
Displays instructions on menu
button operations.