Panasonic BT-LH1760E - Manual (Page 7)

7
The BT-LH1760 LCD monitor was designed especially for broadcasting service and business use. It is equipped
with a high performance 17.0-inch wide LCD display panel.
■ High performance LCD panel
This monitor achieves outstanding color reproduction, a wide viewing angle, and high-speed response.
The double-speed drive in the BT-LH1760 has substantially reduced image lag.
■ Immediate image output of input signals
The time-lag caused by IP field unit conversion
*1
has been eliminated, and the delay from input until image
output has been suppressed to the absolute minimum.
*1 Conversion from interlace to progressive scanning.
■ Multi-format image compatibility
• This monitor is equipped with SDI (HD/SD compatible), VIDEO, YP
B
P
R
/RGB, DVI-D (HDCP compatible) input jacks.
• It supports both NTSC and PAL TV broadcast systems.
■ A host of functions
• Split-screen function
You can divide the screen into two windows, and compare the windows for critical color matching using the
same input terminal and same format.
• Pixel-to-pixel mode
During HD signal input, use this feature to see video in its native resolution (that is every pixel of the original
corresponds to one pixel on the screen).
• Time code display
During HD SDI input, you can select to display VITC, LTC or UB time code.
• Closed caption
During VIDEO (NTSC) input, this feature displays the closed caption information embedded in the video signal.
(EIA-608 compliant)
• Waveform and vector display
This feature shows the waveform (for SDI, VIDEO and YP
B
P
R
inputs) and vector display (for SDI input) of input signals.
• Cross hatch overlay function
Displays markers at regular vertical and horizontal intervals to facilitate composition.
■ REMOTE control
Depending on the intended use of the monitor, you can select between parallel remote control (GPI) and serial
remote control (RS232C).
Dimensions
260(10.2)
30(1.2)
2-M4
17
8
(7.0)
371.6(14.6)
430(16.9)
280(11.0)
233(9.2)
128(5.0)
16(0.6)
81.1
(3.2)
198(7.8)
70
(2.8)
72
(2.8)
16(0.6)
40
(1.6)
3
09(12.2)
3
2
3
.5(12.7)
190(7.5)
75(
3
.0)
15.1(0.6)
14.5(0.6)
20.5 (0.
8
)
22
3
.8
(8
.8
)
166.5(6.6)
190(7.5)
75(
3
.0)
2-M4
100(3.9)
75(3.0)
100(
3
.9)
197(7.
8
)
75(
3
.0)
When installing the monitor in one place permanently, we
recommend that you fix the monitor in place using the screw
holes in the lower part of the stand.
Center
(Opening)
(Op
eni
ng)
Unit: mm (inches)
Outline