Panasonic BT-LH1760E - Manual (Page 18)

18
Underlined values indicate factory defaults.
*1 This setting is turned “ON” when receiving marker control in REMOTE operation. (GPI, if set, has priority.)
*2 These settings are disabled when the GPI function (
J page 36) is used to control the marker setting.
They are also disabled in split screen mode.
*3 This setting is enabled only for HD and SD signal input in 16:9 aspect ratio mode.
*4 This setting is enabled for SD signal input in 4:3 aspect ratio mode.
*5 Remote control via RS-232C ends in error (error response: ER001) when “GPI PRESET1” or “GPI PRESET2”
is selected with the GPI function.
*6 Display size for SD signals differ.
TYPE1: The effective horizontal area meets the SMPTE125M for NTSC and ITU-R BT 601-5 for PAL.
TYPE2: The effective horizontal area meets the EIA-RS170 for NTSC and ITU-R BT 470-4 for PAL.
MARKER
Sub menu Setting Description
MARKER
OFF
*1
ON
Enables the MARKER setting.
16:9
*2*3 OFF
4:3
13:9
14:9
CNSCO
VISTA
95%
93%
90%
88%
80% Selects and displays marker type for 16:9 aspect ratio.
<OFF>
No marker display
<4:3> 4:3 marker <13:9> 13:9 marker
<14:9> 14:9 marker <CNSCO> CNSCO marker
<VISTA> VISTA marker <95%> 95% area marker
<90%> 90% area marker <80%> 80% area marker
<93%> 93.1% area marker (TYPE1)
93% area marker (TYPE2)
<88%> 89.5% area marker (TYPE1)
88% area marker (TYPE2)
4:3
*2*4
OFF
95%
93%
90%
88%
80% Selects and displays marker type for 4:3 aspect ratio.
<OFF>
No marker display
<95%> 95% area marker <93%> 93% area marker
<90%> 90% area marker <80%> 80% area marker
<88%> 89% area marker (TYPE1)
88% area marker (TYPE2)
BACK
*2 NORMAL
HALF
BLACK Selects the background brightness around the marker.
<NORMAL>
Normal background
<HALF> 50% background brightness
<BLACK> 0% background brightness (black)
CENTER
*2 OFF
ON Displays the center marker.
<OFF>
Turns the display off
<ON> Turns the display on
GPI PRESET1
*5 4:3
13:9
14:9
CNSCO
VISTA
95% (16:9)
93% (16:9)
90% (16:9)
88% (16:9)
80% (16:9)
95% (4:3)
93% (4:3)
90% (4:3)
88% (4:3)
80% (4:3) GPI PRESET1: Selects the marker displayed by the GPI terminal
“MARKER1 ON/OFF” (
J page 36) operation.
GPI PRESET2: Selects the marker displayed by the GPI terminal
“MARKER2 ON/OFF” (
J page 36) operation.
<4:3> 4:3 marker
<13:9> 13:9 marker
<14:9> 14:9 marker
<CNSCO> CNSCO marker
<VISTA> VISTA marker
<95% (16:9)> 95% area marker for 16:9 aspect ratio
<93% (16:9)> 93% area marker for 16:9 aspect ratio
<90% (16:9)> 90% area marker for 16:9 aspect ratio
<88% (16:9)> 88% area marker for 16:9 aspect ratio
<80% (16:9)> 80% area marker for 16:9 aspect ratio
<95% (4:3)>
95% area marker for 4:3 aspect ratio
<93% (4:3)> 93% area marker for 4:3 aspect ratio
<90% (4:3)> 90% area marker for 4:3 aspect ratio
<88% (4:3)> 88% area marker for 4:3 aspect ratio
<80% (4:3)> 80% area marker for 4:3 aspect ratio
GPI PRESET2
*5
MARKER TYPE
*6
TYPE1
TYPE2 Selects conventional monitor or camera recorder marker size.
<TYPE1>
Conventional monitor marker size
<TYPE2> Marker size compliant with the camera recorder (Panasonic)
CROSS HATCH HIGH
LOW
OFF Turns the cross hatch grid on and off and sets its density.
<HIGH>
70/256 (displays a dense cross hatch grid)
<LOW> 20/256 (displays a light cross hatch grid)
<OFF> Turns the display off
Main Menu
(continued)