Panasonic BT-LH1760E - Manual (Page 33)

33
Main Menu
(continued)
Underlined values indicate factory defaults.
*1 Available during HD-SDI input signals.
*2 Available during VIDEO (NTSC) input. Closed captions appear as bright lines on line 21 when closed caption is
set to ON and underscan is also on.
*3 Opens the vector display during SDI signal input.
DISPLAY SETUP
Sub menu Settings Description
WFM/
VECTOR
OFF
WFM
VECTOR Switches between “WFM/VECTOR” waveform and vector display.
<WFM> Displays
waveforms.
<VECTOR> Displays vector waveforms.
*3
POSITION LB
RB
RT
LT Selects the position for the “WFM/VECTOR” waveform display.
*3
<LB> Left Bottom
<RB> Right Bottom
<RT> Right Top
<LT> Left Top
VECTOR
MODE
Ч 8
Ч 4
Ч 2
Ч 1 Enlarges vector waveforms.
*3
<× 8> 8×
<× 4> 4×
<× 2> 2×
<× 1> 1×
VECTOR
SCALE 100%
75% Determines the scale of vector waveform.
<100%>
Displays it at 100% scale.
<75%> Displays it at 75% scale.
TIME CODE OFF
ON
Turns the time code display on and off.
*1
MODE
SELECT LTC
VITC
LUB
VUB Selects time code display mode.
*1
<LTC> Displays linear time code (LTC).
<VITC> Displays vertical interval time code (VITC).
<LUB> Displays user bits included in LTC.
<VUB> Displays user bits included in VITC.
CLOSED
CAPTION OFF
ON
Turns closed caption display on and off.
*2
MODE
SELECT CC4
CC3
CC2
CC1
Selects the cross caption display mode.
*2