Panasonic BB-HCM381A - Manual (Page 120)

Operating Instructions
120
• Click [Save] to save the settings.
• Clicking [Cancel] takes you back to the Trigger page without saving
changes.
Note
• If you click [Save], all buffered images on the SD memory card are
deleted.
4. Set the time, and click [Next>].
• Clicking [<Back] takes you back to the previous page.
• Clicking [Cancel] takes you back to the Trigger page without saving
changes.
Note
• The timer works by an internal clock. Set the date and time before using
timer buffer/transfer (see page 77).
Setting Description
Enable Image
Buffer/Transfer • Check the box to enable the Trigger setting. Uncheck
the box to disable it.
Trigger • Selecting [Timer] enables the camera to buffer/transfer
images by timer.
• Selecting [Alarm 1 or 2] enables the camera to buffer/
transfer images by alarm signal.
• Selecting [Motion Detection] enables the camera to
buffer/transfer images when the motion is detected.
Setting Description
Day of the week • Check the box to enable the Trigger setting. Uncheck
the box to disable it.
Active Time of
Trigger • To set a trigger time, check the time option and set a
time period. Check the [Always] option if you are not
specifying a time period.