Panasonic BB-HCM381A - Manual (Page 58)

Operating Instructions
58
IPsec Mode Selection
Select transport mode or tunnel mode to access the camera.
Transport Mode (IPv4 Only)
The image is encrypted for the whole way between the camera and your PC. The
transport mode is available only in IPv4 for users of Windows XP Service Pack 1
or later.
Prepare the following required items:
Item Supported Feature
PC Operating
System : Windows XP Service Pack 1 or later
Web Browser : Internet Explorer 6.0 or later
ISP Service : A service for multiple global addresses (A
global address must be set up on your PC.)
Note
• To use IPsec, you need to set up your operating system. See
the Panasonic Network Camera support website at http://
panasonic.co.jp/pcc/products/en/netwkcam/ for setup
details.
Camera ISP Service : A service for multiple global addresses (A
global address must be set up to the camera.)
Transport Mode
Encrypted