Panasonic BB-HCM381A - Manual (Page 144)

Operating Instructions
144
4.9.3 Stop the SD Memory Recording
After you stop the SD memory recording, remove the SD memory card.
Note
• You can confirm the SD memory card capacity on the Status page.
• Images will be recorded to the SD memory card again by the following
operations.
–
If the camera is restarted, the SD memory recording starts again.
– If you remove the SD memory card and insert it again, the SD memory
recording starts again.
1. Click [Trigger] on the Setup page.
2. Click [SD video recording stop].
3. Click [OK] on the confirmation window.
• The SD memory recording is stopped.
4. Click [Go to Trigger page].
• The Trigger page is displayed.
Note
• Ensure that recording has stopped before removing the SD memory card.
Do not remove the SD memory card, nor restart or turn off the camera
while recording images on the card. Doing so can cause a decrease in SD
memory card capacity, data corruption or camera malfunction.