Patton electronic G.SHDSL INTEGRATED 3086 - Manual (Page 67)

Using the 3086 in Routed or Bridged applications 67
Model 3086 G.SHDSL Integrated Access Device User Guide 4 • Basic Application Configurations
– LLC header mode = off
– HDLC header mode = on
– No authentication
– Leave User name and Password blank.
Click on Apply .
3. Go to G.SHDSL in the Configuration Menu, then the submenu Configuration .
Leave Terminal Type as Remote.
Change Interface Type to hdlc . Click on the Configure button.
In the Action submenu under G.SHDSL, change Action to Deactivate , then click on Action .
Return to Action, select Start and click on Action .
Network Extension (HDLC—PPPoH Routed)
Model 3086 (Remote) Configuration Steps (PPPoH Routed)
From the command line interface (CLI) via the RS-232 control port,
fi ip list interfaces
One IP interface was called ip1 with an IP address of 192.168.1.1 Change it to an IP address which is in the
same subnet as the Desktop PC. For example, to 192.168.100.2. The default IP mask is 255.255.255.0.
fi ip set interface ip1 ipaddress 192.168.100.2 255.255.255.0