Patton electronic G.SHDSL INTEGRATED 3086 - Manual (Page 83)

DSLAM Connections with remote CPE units 83
Model 3086 G.SHDSL Integrated Access Device User Guide 4 • Basic Application Configurations
In the Description field, enter the description you wish. In this example, it is called RFC 1483 Routed.
Change the configuration parameters to match the following.
Description:RFC 1483 Routed
– VPI:0
– VCI:35
– Encapsulation Method: LLC/SNAP
– WAN IP Address:192.168.164.2
Click on Configure .
3. Configuration Menu > Configuration > IP Routes > Click on Create new Ip V4 Route > Create the gate-
way to the remote 3086 by entering the WAN IP address of the remote 3086, in this example, enter
192.168.164.3 in the Gateway field > OK