Panasonic WV-NS202 - Manual (Page 23)

23
Note:
When "FTP error" is selected for "Save trigger", the
file name entered for "File name" on the [FTP] tab of
the "Network setup" page will be used for the file
name of the image saved on the SD memory card.
[Frame rate]
Select an image save interval from the following.
0.1 fps/0.2 fps/0.33 fps/0.5 fps/1 fps
Default: 1 fps
[Number of images]
Select a number of alarm images to be saved on the SD
memory card from the following.
10 pics/20 pics/ 30 pics/50 pics/100 pics/200 pics/
300 pics/500 pics/1000 pics/2000 pics/3000 pics/
5000 pics
Default: 100 pics
Note:
"Save interval" and "Number of images" can be con-
figured only when "Alarm input" is selected for "Save
trigger".
[Image capture size]
Select "QVGA" or "VGA" for the size of the images to be
saved on the SD memory card.
Default: VGA
Notes:
• When "FTP error" is selected for "Save trigger",
images will be saved with the image capture size
selected on the [FTP] tab of the "Network setup"
page.
• When "Alarm input" is selected for "Save trigger",
images will be saved with the image capture size
selected on the [Alarm] tab of the "Alarm setup"
page.
■ SD memory card information
[SD memory card]
Available size and the total size of the SD memory card
will be displayed.
Depending on the status of the SD memory card, the
size indications will differ as follows.
Indication Description
--------KB/--------KB No SD memory card is inserted.
Failed to obtain available size
due to error, etc.
********KB/********KB The SD card memory is unfor-
matted, or locked, etc.
Note:
When "OFF" is selected for "Overwrite" (
☞ page 22)
and the available size of the SD memory card has
reached "0 KB", images will not be saved on the SD
memory card. When the notification function is on, a
notification mail will be sent to the registered
addresses when the SD memory card becomes full.
(
☞ page 52)
[Format]
To format the SD memory card, click the [Execute] but-
ton.
Important:
• Before formatting the SD memory card, it is neces-
sary to select "Use" for "SD memory card" on the
[SD memory card] tab of the "Basic setup" page (
☞
page 22) and "OFF" for "FTP periodic transmission"
on the [FTP] tab of the "Network setup" page (
☞
page 63).
• Only format the SD memory card by clicking the
[Execute] button on the setup menu. Otherwise, the
following functions using the SD memory card may
not work properly with this camera.
• Save/obtain images that failed to transmit to the
FTP server using the FTP periodic transmission
function
• Save/obtain alarm images
• Save/obtain images saved manually
• Save/obtain the system logs
• Save/obtain images recorded using the SD
memory recording function of Panasonic's net-
work disk recorder.
• It is impossible to access the SD memory card dur-
ing the process of formatting.
• All data saved on the SD memory card will be delet-
ed when the SD memory card is formatted.
• Do not turn off the power of the camera during the
process of formatting.