Panasonic WV-NS202 - Manual (Page 29)

29
Configure the settings relating to the camera title and the camera operations [Cam
Function]
Click the [Cam Function] tab on the "Camera setup" page. (
☞ page 15)
Configure the settings relating to camera title and the camera operations on this page.
[Camera title on screen]
Select "ON" or "OFF" to determine whether or not to dis-
play the camera title on images.
Default: OFF
[Camera title on screen (0-9, A-Z)]
Enter the camera title to be displayed on images.
Number of characters for the camera title: 0 - 16
characters
Available characters: 0-9, A-Z and the following
marks.
!"#$%&‘()*+,-./:; =?
Default: None (blank)
Note:
When "ON" is selected, the entered camera title will
be displayed at the position selected for "OSD
Position" on the [Basic] tab of the "Basic setup"
page. (
☞ page 20)
[Home position]
A preset position (
☞ page 36) can be set as the home
position.
When a preset position is set as the home position, "H"
will be displayed next to the preset position number.
[Self return]
When the time set for "Self return" has passed after
manual operations of the camera, the camera will auto-
matically be in the selected mode. This function is also
useful to automatically set the camera in a specific
mode when the power of the camera is turned on.
OFF: The camera will not be in any mode.
Home position: When the set time has passed, the
camera will move to the home position automatical-
ly.
Auto track: When the set time has passed, the camera
will move to the home position and will start the auto
track function. The camera will repeat this action
(moves to the home position and starts the auto
track function) afterward.
Auto pan: When the set time has passed, the camera
will start the auto pan function.
Preset sequence: When the set time has passed, the
camera will start the sequence function.
Default: OFF
Note:
The self return function works even when the setup
menu is displayed.
[Self return time]
Select a waiting time (amount of time until the camera
starts the selected operation after the end of the manual
operations) from the following.
10 sec/20 sec/30 sec/1 min/ 2 min/3 min/5 min/10 min/
20 min/30 min/60 min
Default: 1 min
[Image Hold]
Select "ON" or "OFF" to determine whether or not to
hold the still image on the screen (that is displayed at
the last moment before the camera started to move to a
preset position) until the camera has moved to the pre-
set position.
ON: A still image will be held on the screen until the
camera has moved to the preset position.
OFF: Images from the camera will be displayed even
when the camera is moving to the preset position.
Default: OFF