Panasonic WV-NS202 - Manual (Page 37)

37
[Preset ID (0-9, A-Z)]
Enter the preset ID to be displayed on images. The pre-
set IDs can be applied to each preset position.
Available characters: 0-9, A-Z and the following
marks.
!"#$%&‘()*+,-./:; =?
Number of characters for the preset ID: 0 - 16 char-
acters
Default: None (blank)
Note:
The entered preset ID will be displayed next to the
preset position number on the pull-down menu.
When "ON" is selected for "Preset ID", the preset ID
will be displayed on images.
[Auto focus]
Select "AUTO" or "OFF" to determine whether to enable
or disable the auto focus function after the camera has
moved to a preset position. This function can be applied
to each preset position.
AUTO: The auto focus function will be activated after
moving to a preset position.
OFF: Does not activate the auto focus function after
moving to a preset position.
Default: OFF
Note:
When the preset position is set to shoot the following
objects, it is recommended to select "OFF" since the
camera can focus on them quickly.
• An object whose depth never changes
• An object whose contrast is low
• An object with high luminance such as a spotlight
[Dwell time]
Select a dwell time (duration the camera stops for at
each preset position) for the preset sequence operation.
The selected dwell time will be applied to all preset posi-
tions.
5 sec/10 sec/20 sec/30 sec
Default: 10 sec
[Super Dynamic 3]
Select "ON" or "OFF" to determine whether to turn on or
off super dynamic 3 (SUPER-D 3). This function can be
applied to each preset position.
ON: Turn on SUPER-D 3
OFF: Turn off SUPER-D 3
Default: OFF
[Mask area]
When "OFF" is selected for "Super Dynamic 3", it is
possible to compensate for backlight by masking
brighter areas.
Refer to page 35 for descriptions of how to mask.
ZOOM buttons
FOCUS buttons
BRIGHTNESS buttons
Control pad/buttons
Refer to pages 6 and 7 for descriptions of how to oper-
ate these buttons/pad.
Panning, tilting and zooming operations can also be car-
ried out on the [Image/Position] tab.
[CLOSE] button
Click this button to close the "Preset No." setup menu.