Before use, Power on, Power off – Panasonic CQ-VA707N User Manual
Page 10: How to open and raise the display
11
CQ-VA707N
E
N
G
L
I
S
H
8
Before Use
Power on
Press [PWR](Power) or [MODE] to switch on the power.
* When using the display unit, press [MODE](PWR) to switch on the
power.
[Default : FM mode]
Power off
Press [PWR] again to switch off the power.
Or, press and hold [MODE] for more than 2 seconds to switch off the
power.
* When using the display unit, press and hold [MODE](PWR) for
more than 2 seconds to switch off the power.
Turn the key in the ignition until the accessory indicator lights.
Warning:
Do not insert hands, fingers or foreign objects into the unit while the display is moving.
Inserting your hands, fingers or foreign objects into the unit can cause injuries and damage to the unit.
Display
How to Open and Raise the Display
Press [
](OPEN/CLOSE) to draw out and raise the display.
The display unit is automatically set at the angle and in the position
adjusted before. (
a
pages 12 and 16)
Note:
When the display unit is opened or closed, a loud beep sounds three
times.
Cautions:
¡Mount the unit in a position where it will be free from contact with
any obstacle.
¡If the unit stops halfway, press [
](OPEN/CLOSE) again and
draw it all the way in.
¡Do not forcibly move it by hand.
¡Do not enter your finger or hand into moving parts and disc slot.
Otherwise, you and the unit may be damaged. Keep babies and
children away from the unit.
1
2
3
4
5
6
TA
AF
PTY
A
LOC
MODE
NAVI
MENU
PWR
ENTER
MUTE
VOLUME
TRACK
DISC/BAND
NAVIGATION
CH
z
CH
x
RANDOM
SCAN
REPEAT
TITLE
ASPECT
OPEN/CLOSE
Car AV
MODE
PWR
[PWR](Power)
[MODE]
[
](OPEN/CLOSE)
CH·C
TV
VOLUME
PWR
PWR
OPEN/CLOSE
OPEN/CLOSE
MODE
MODE
TILT
TILT
MUTE
CQ-VA707N
PWR
OPEN/CLOSE
7.0'' WIDE COLOR LCD MONITOR WITH RECEIVER
7.0'' WIDE COLOR LCD MONITOR WITH RECEIVER
7.0'' WIDE COLOR LCD MONITOR WITH RECEIVER
MODE
TILT
EON*PTY*CT
MODE
[
](OPEN/CLOSE)
[MODE]
Caution: If your car has no ACC position, be sure to switch this
unit off before stopping the engine.