Panasonic CQ-VA707N - Manual (Page 20)

Note: When failing in entering ID
code, a screen on the right is dis-
played, and the unit beeps three
times. Enter a correct ID code.
In case of failing in entering ID code
three times consecutively, the power
is turned off. Turn on the power
again and enter a correct ID code in
this case.
21
CQ-VA707N
E
N
G
L
I
S
H
18
q Press [PWR] or [MODE] to switch on the power.
* When using the display unit, press [MODE](PWR) to switch on
the power.
The loud beep sounds for 10 seconds.
w Press [ ] (OPEN/CLOSE) to raise the display unit during the loud
beep is sounding.
* The display unit is not raised even if you press
[ ] after the loud
beep stops. In such a situation, switch off the power and try the
procedure again.
e ID code input screen is displayed. Enter the ID code using the
remote control.
Notes:
¡Press [MODE] to close the main menu and the setting/adjusting menu.
¡Press [MENU] in the setting/adjusting menu to return to the main menu mode.
¡The setting/adjusting menu is automatically closed if no operation is performed for about 10 seconds.
1 2 3
4 5 6
TA AF PTY
A LOC
MODE NAVI MENU
PWR
ENTER
MUTE
VOLUME
TRACK
DISC/BAND
NAVIGATION
CH z CH x
RANDOM SCAN REPEAT
TITLE
ASPECT OPEN/CLOSE
Car AV
MODE
PWR
[PWR](Power)
[MODE]
[ ](OPEN/CLOSE)
CH·C TV
VOLUME PWR PWR
OPEN/CLOSE OPEN/CLOSE MODE MODE TILT TILT
MUTE
CQ-VA707N
PWR
OPEN/CLOSE
7.0'' WIDE COLOR LCD MONITOR WITH RECEIVER 7.0'' WIDE COLOR LCD MONITOR WITH RECEIVER 7.0'' WIDE COLOR LCD MONITOR WITH RECEIVER
MODE TILT
EON*PTY*CT
MODE
[ ](OPEN/CLOSE)
[MODE]
Numeric button
ID Code Input
¡ When removing the unit from the car and mounting it on another car,
¡ When replacing a car battery with a new one,
or other cases
When the unit is disconnected from the main power supply such as the above cases, follow the proce-
dure below.
Note: All settings return to the default setting except ID code.
success
➞