Panasonic CQ-VA707N - Manual (Page 49)

50
CQ-VA707N
E
N
G
L
I
S
H
47
❏ Transportation bracket removal
Be sure to remove the transportation brackets before use (installation).
Use screws (5 mm
φ x 6 mm) with washers for installation.
Be careful not to lose these screws.
Display Unit
Binding-Head
Screws
(5 mm
φ x 6 mm)
Binding-Head
Screws
(5 mm
φ x 6 mm)
Transportation
Bracket
Transportation
Bracket
Installation
Preparation
¡Before installation, check the radio operation with
antenna and speakers.
¡Disconnect the cable from the negative (–) battery
terminal (see caution below).
¡The unit should be installed in a horizontal posi-
tion with the front end up at a convenient angle,
but not more than 30°.
Caution: Do not disconnect the battery terminals of a car with trip or navigational computer since all
user settings stored in memory will be lost. Instead take extra care with installing the unit to prevent
shorts.
30
° or less
Dashboard Installation
Installation Opening
The unit can be installed in any dashboard having an opening as shown at
right. The dashboard should be 4.5 mm - 6 mm thick in order to be able to
support the unit.
182 mm
53 mm
¡When bending the mounting tab of the mounting collar with a screwdriver, be careful not to injure your
hands and fingers.
¡We strongly recommend you to wear gloves for installation work to protect yourself from injuries.