Panasonic CQ-VA707N - Manual (Page 60)

61
CQ-VA707N
E
N
G
L
I
S
H
58
Connecting the Parking Brake Connection Lead
Parking Brake Foot Brake
– +
(Blue w/yellow stripe)
Parking Brake Connection Lead
Parking Brake Switch
Battery
Vehicle Chassis Brake Light !4Clip Connector
SIDE BRAKE
The parking brake switch position
varies with the vehicle model.
Side Brake (parking brake) Connection Lead
When the parking brake lever is engaged, the unit is grounded by the chassis.
q Attach a clip connector !4 to the end of the
parking brake connection lead.
w The clip connector !4 is connected to the
power source side lead of the parking brake
lever.
Comes up to this point
Parking Brake Connection Lead (Blue w/yellow stripe) Power Source Side Lead
Caution: For safety, be sure to ask your nearest professional installer to do this connection.
Connecting the Reverse Cord
* In case using an optional rear-view camera, the reverse lead must be connected.
¡Connect the reverse lead (violet w/white stripe) to the positive (+) lead of the reverse lamp (the lamp with
a clear lens that lights when the transmission gear is shifted into the reverse position).
+ -
P
R
N
D
2
L
Reverse Lamp
Reverse Lead
(Violet w/white stripe) !3Reverse
Extension Cord
REVERSE
Clip Connector
Battery
Car Body
Transmission Gear
Check the reverse lamp.
* Take it out of the back of the tail lamp mount.
Note: Connect the reverse lead after cutting the terminal at the end.