Pfaff 1246 - Manual (Page 69)

Adjustment
11 - 29
11. 05.10 Connecting rod (for PFAFF 1246 only)
● Loosen nuts 1 (right- and left-hand thread) when the cutting device is in the off-position.
● Measure the distance between shafts 2 and 3.
● Rotate connecting rod 4 according to the requirement.
● Re-tighten nuts
1.
Requirement
When the cutting device is in the off-position, the length of spacer rod
4 should be equal to
the distance between shafts
2 and 3.
Fig. 11 - 25a
2
3
4 1 1
X
X