Panasonic KX WP1050 - Manual (Page 153)

Base Unit Settings
For assistance, please visit http://www.panasonic.com/help 153
3
Configure the settings, then click [Save].
4
Click [Restart].
L
The base unit automatically restarts and the Top Menu is displayed.
Note:
L If you change the LAN network settings or DHCP server settings, the entries in the Static
DHCP table will be deleted.
L
In step 4, if the LAN side setting is changed, you need to change your computer’s setting
and click the link shown on the Restarting page.
Setting Description
[IP Address]
L
Enter the IP address and subnet mask corresponding to your
local network.
L Set 4 numbers (0 – 255) separated by periods such as
“192.168.0.253”.
Note:
L There are some restrictions on IP address entry. For
example, “0.0.0.0” and “255.255.255.255” are not available.
[Subnet Mask]
[DHCP Server]
L
This setting assigns IP addresses to devices on your LAN.
Select whether to enable or disable this feature.
[Starting IP
Address] L Enter the starting IP address for the DHCP server’s IP
assignment.
[Number of
Leased IP
Address]
L
Enter the number of the leased IP addresses (maximum: 5).
The first IP address is assigned to the handset. The
subsequent ones are assigned to computers.
WP1050.book Page 153 Wednesday, April 25, 2007 6:01 PM