Panasonic KX WP1050 User Manual
Page 196
Base Unit Settings
196
For assistance, please visit http://www.panasonic.com/help
Temporary LAN Side Network Setting when networks
on the WAN side and the LAN side overlap
When networks on the WAN side and the LAN side overlap, the connection to the WAN
side of the base unit is terminated. In this case, you are required to change the LAN side
settings from the current LAN side settings (default IP address: 192.168.102.1, default
subnet mask: 255.255.255.0).
If the unit detects a network overlapping, the Temporary LAN Side Network Setting page
is displayed.
You can change the LAN side settings temporarily with the following steps:
L
WAN Indicator on the base unit alternately flashes between in Amber and Green in turn.
This state represents that the connection to the WAN side of the base unit is terminated.
WP1050.book Page 196 Wednesday, April 25, 2007 6:01 PM