Panasonic KX WP1050 User Manual

Page 35

Advertising
background image

Getting Started

For assistance, please visit http://www.panasonic.com/help

35

1

Switch the Mode selector to “HOME”.

2

Turn off your computer properly. Unplug your cable or DSL modem’s power cord and
leave the modem turned off for at least 10 minutes to clear its memory. Unplug any
cable connecting the modem to your computer. However, the modem needs to remain
connected to the Internet.

3

Make sure the base unit is left unplugged. Connect the included Ethernet cable to the
“WAN” port on the base unit and the Ethernet (LAN) port on the modem.

4

Connect a separate Ethernet cable to the “LAN” port on the base unit and the Ethernet
(LAN) port on your computer (the same Ethernet (LAN) port you have just unplugged
your modem from in step 2).

L

You can also connect your computer to the base unit via wireless LAN connection.

5

Plug your modem’s power adaptor into an AC outlet.

L

Wait for your modem’s power light to stop flashing before you go to the next step. (It
may take a few minutes.)

6

Connect the included AC adaptor cord to the power port on the base unit and an AC
outlet.

L

When the base unit turns on (The WAN indicator lights in green or amber), the
installation is complete.

WP1050.book Page 35 Wednesday, April 25, 2007 6:01 PM

Advertising