Panasonic KX WP1050 - Manual (Page 211)

Useful Information
For assistance, please visit http://www.panasonic.com/help 211
Error messages
If the unit detects a problem, one of the following messages is shown on the handset
display.
Network:
Sign in:
Display message Cause/solution
Networks were not
found.
L
Move closer to the base unit or an access point.
L Press {Search} to search for networks again.
L
Press {Options} i Select “Add manually” to add
network manually.
L Press {Options} i Select “Preferred networks”
to configure preferred networks list.
Could not connect
to <Network name>
L
A network connection failed.
L
Check that the security type and the network key are
correct.
L
Press {OK} i Re-connect the network again.
Could not get IP
address from
<Network name>
L
The handset could not get an IP address automatically.
L
Check that the DHCP server of the base unit is enabled.
L Make sure the Static IP address of the computer uses
the same address as DHCP lease address.
Failed to connect
to the base unit.
Register again.
L
The handset is not registered to the base unit.
L
Register the handset (page 133).
Display message Cause/solution
Your Skype name and
password were not
recognized.
L
The Skype name and/or password you entered are not
correct.
L
Press {Retry} i Re-enter the Skype name and
password correctly.
Sign in was not
successful.
L
Check the network connection.
L Press {Retry} to try again.
WP1050.book Page 211 Wednesday, April 25, 2007 6:01 PM