Panasonic KX WP1050 User Manual
Page 24
Introduction
24
For assistance, please visit http://www.panasonic.com/help
WAN
Green/
Amber
A short
blinking in
Amber and
a long
flash in
Green
An Internet connection has been
established using the Temporary LAN side
network settings.
L
During this time, Port Forwarding, DMZ,
Packet Filtering and Static Routing
features are disabled. To re-activate
these features, change the LAN network
settings.
Alternate
flashing
The networks on the LAN and WAN sides
overlap and the connection to the WAN
side of the base unit is terminated.
L
The network configuration of the LAN
needs to be temporarily changed to
avoid an overlap of the LAN and WAN
networks.
Amber
On
An Internet connection has not yet to be
established (No IP address obtained).
Flashing
The base unit firmware may be defective
and requires a firmware update.
L
See “Downloading the version-up
firmware to your computer for recovering
the base unit” (page 199).
Red
Flashing
The base unit hardware may be defective.
L
Visit:
http://www.panasonic.com/help
Off
–
The Ethernet cable is not connected to the
WAN port on the rear of the base unit.
Indicator
type
Indicator
color
Indicator
pattern
Status
WP1050.book Page 24 Wednesday, April 25, 2007 6:01 PM