Mode related control commands ils-mode – Procom VOR/ILS Analyzer EVS200 User Manual
Page 44
VOR/ILS Analyzer EVS200
0796.1800.02
E-8
35
Chapter 3: Operation
Command MI
command
function
MI
<Mode-ILS>
ILS mode setting
The command MI enables the switching over to the "ILS“ mode.
Example:
command from the controller
response of the VOR/ILS Analyzer EVS200
input:
MI <CR>
mi <CR>
READY <CR/LF>
READY <CR/LF>
Command MB
command
function
MB
<Mode-BEACON>
BEACON mode setting
The command MB enables the switching over to the "BEACON mode“.
Example:
command from the controller
response of the VOR/ILS Analyzer EVS200
input:
MB <CR>
mb <CR>
READY <CR/LF>
READY <CR/LF>
Mode related control commands
ILS-Mode
Command DD0
command
function
DD0
<DDM information>
DDM value query
The command DD0 reads the actual DDM value (value without dimension) in the ILS mode.
Example:
command from the controller
response of the VOR/ILS Analyzer EVS200
query:
DD0 <CR>
dd0 <CR>
e.g.
0.2008 <CR/LF>
e.g.
0.2008 <CR/LF>