Procom VOR/ILS Analyzer EVS200 - Manual (Page 53)

VOR/ILS Analyzer EVS200
0796.1800.02 E-8 44
Chapter 3: Operation
VOR-Mode
Command BE
command funcion
BE <Bearing Angle> bearing angle query
The command BE reads the actual bearing angle (indicated in degree) in the VOR mode.
Example:
command from the controller response of the VOR/ILS Analyzer EVS200
query: BE <CR>
be <CR> e.g. 299.97DEG <CR/LF>
e.g. 299.97DEG <CR/LF>
Command AM0
command function
AM0 <AM-modulation depth (30 Hz)> query of AM-modulation depth (30 Hz)
The command AM0 reads the actual AM-modulation depth (30 Hz) in the VOR mode.
Example:
command from the controller response of the VOR/ILS Analyzer EVS200
query: AM0 <CR>
am0 <CR> e.g. 30.1% <CR/LF>
e.g. 30.1% <CR/LF>
Command AM1
command function
AM1 <AM-modulation depth (9960 Hz)> query of AM-modulation depth (9960 Hz)
The command AM1 reads the actual AM-modulation depth (9960 Hz) in the VOR mode.
Example:
command from the controller response of the VOR/ILS Analyzer EVS200
query: AM1 <CR>
am1 <CR> e.g. 30.1% <CR/LF>
e.g. 30.1% <CR/LF>